For those of you wanting to make your mask a little more shiny or wet looking around the eyes and mouth, our own Justin Mabry wrote up a little secret tip:
“This is the old tried and true technique that the legendary Rick Baker developed. It was also passed through the years to many fantastic mask companies through the 80′s and 90′s.
To achieve a wet look to eyes or mouth, you will need to go to the hardware store or art supply and get 5-minute epoxy. Devcon 5-minute epoxy is most commonly used for this. I use “Devcon” and “Extreme Power”, both can be found at Hobby Lobby see photo) Get a pack of those cheap artist brushes to apply it (see photo).
I prefer to mix the 2 equal parts in small mouthwash cups (like Solo or Dixie). I mix the 1part A and 1part B with the back end of the brush.
Remember to work fast – it sets in 5 minutes.
Brush it on where you want, preferably eyes. It has a slight flex, but be careful not to crack it. You may want to test it on an old mask or some scrap rubber, because once it’s on it’s not coming off without taking paint with it.
Remember to always use this or any chemical in a well ventilated area. Read the package for any other precautions.
Good Luck!
Justin “
I was just wondering about this the other day. This couldn’t have come at a better time! I love all of these helpful hints you guys have. Thank you so much!!
Nick